9
DP20
2
Attaching the Camera Cable
(Fig. 3)
# Be sure to set the main switch @ to “ ” (OFF) before cable
connection.
1. Insert the L-shaped connector ² of the camera cable into the connector
³ of the camera head, and tighten the locking screws on both sides of
the connector.
2. Insert the connector | on the other end of the camera cable into the
connector
5
of the control box, and tighten the locking screws on both
sides of the connector.
}If the L-shaped connector comes in the way of mounting the camera
head on the microscope, the L-shaped connector can be connected to
the control box.
Insert the connector @ of the cable from the display into the connector
² of the control box, and tighten the locking screws on both sides of
the connector.
# Always be sure to use the specified AC adapter. Using any other AC
adapter will result in a malfunction.
The cords and cables are vulnerable to bending or twisting. Do not
apply excessive force to them.
1. Insert the output connector @ of the AC adapter into the DC input
connector ² of the control box.
Always use the power cord provided by Olympus. If no power cord
is provided, please select the proper power cord by referring to
“PROPER SELECTION OF THE POWER SUPPLY CORD” at the end of
this instruction manual. If the proper power cord is not used, Olympus
can no longer warrant the electrical safety performance of the
product.
2. Insert the connector ³ of the power cord into the input connector | of
the AC adapter.
3. Insert the plug of the power cord into a power outlet.
Always ensure that the grounding terminal of the microscope and
that of the wall outlet are properly connected. If the equipment is not
grounded, Olympus can no longer warrant the electrical safety
performance of the equipment.
}The AC adapter gets hot when it has been connected to a power outlet
for a long period. This is not a malfunction.
Fig. 3
Fig. 4
1
2
Fig. 5
3
Attaching the Display Cable
(Fig. 4)
4
Attaching the AC Adapter
(Fig. 5)
1
2
3
4
5
1
2
3
4