22
Scale display range
Factory setup:
}When the scale display is set, this item selects whether the
scale and measurements are displayed on the display screen
only or both in the display screen and recorded picture.
}The setting of this item is also applied to the measurement
function.
Display scale and
measurements in
both display and
recorded picture.
Display scale and
m e a s u r e m e n t s
only on the display
screen.
Registered data number setting
Factory setup: ON1/000
}This item is used to set desired 3-digit numbers to the data in
ON1 to ON7.
This setting is not possible when the TMP (Temporary Saving)
setup is engaged.
Actual examples of scale settings
· Assume that the 4X,. 10X and 20X objectives are switched and a 0.5X TV adapter is used. Note that the magnification
of eyepieces does not affect the scale setting.
@How to calculate the available photographing magnifications
This is equal to Objective magnification x TV adapter magnification.
Therefore, it is 2X with the 4X objective, 5X with the 10X objective or 10X with the 20X objective.
²How to set the photographing magnifications
ON1: Set the magnification with the 4X objective. 0002.00 (which represents 2X)
ON2: Set the magnification with the 10X objective. 0005.00
ON3: Set the magnification with the 20X objective. 0010.00
³How to set the registered data number
}Any numbers can be set, but most convenient is to register the objective magnifications.
ON1: Since the objective magnification is 4X 004 (which represents the 4X objective)
ON2: Since the objective magnification is 10X 010
ON3: Since the objective magnification is 20X 020
|When performing microscopic observation using the 4X objective, set the registered data number to ON1/004. It
should be set to ON2/010 when the 10X objective is selected.
000
999
ON1
ON2
ON3
ON4
ON5
ON6
ON7
TMP (Temporary Saving)