I’ve Already Connected My Camera to Internet, But I Can’t Connect It in
the
App.
Make sure you used the right QR code during the pairing
process
.
Make sure you are using the 2.4GHz Wi-Fi, the camera can’t support 5GHz yet. The camera supports IPV4 only. DHCP Server/Services should be enabled
on the router setting.
If you are using a firewall, all ports from 10000 to 65635 of your cameras IP address should be allowed for in/out in the firewall rule
to allow
data from
the camera.
I Can’t Save the Snapshots.
The App will need access to your phone's album to save the snapshots. The authorisation might need to be approved while using the function for the
first time in some phones.
If you click the ‘No’ option during the authorisation, you might need to enable it in the system setting menu.
How to Reset My Camera Network?
If you relocate the camera
, launch the APP and tap “Network Setting” on
the
“Accessory Setting” page
.
P
ress and hold the reset button on the
back of
the camera for 3s after the camera is powered on, it’ll make a tone and enter AP mode.
How to Reset My Camera?
PLEASE MAKE SURE YOU CLEARLY
UNDERSTAND
THE RESULT OF RESETTING:
ALL DATA WILL BE ERASED INCLUDING THE INTERNET SETTINGS.
Press and hold the reset button on the back of the camera for 10s after the camera is powered on
. A
fter successfully
resetting
, it will make a tone which
means the reset is done and
the
camera enters AP mode.
Installation Guide
Prior to installation ensure that the installation environment can support at least 3 times the weight of the camera.
And do not place objects on top of the camera.
•
Drill hole
s
on the wall in the
correct
position.
•
Seat the
wall plugs
in the pilot holes.
•
Mount
the camera
to the wall.
FAQ
Features
Designed for use with
VIGILATE Smar
t
alarm systems, the
VIGIFC Indoor Camera
is a wireless Internet based camera that provides outstanding
performance.
This IP camera is easy to configure and operate via
the VIGILATE Control
App. It uses Access Point technology to help the camera connect
to wireless router
s
fast and eas
ily
.
By
ultising
global oversea servers, users can easily watch the live video or recorded videos on
their
phone from anywhere anytime.
Video Resolution 1920x1080@30FPS
,
Auto IR-LED illumination with auto IR-Cut Switch
,
8 IR LEDs
,
IR Night vision range(8 meters)
,
Wi-Fi compliant
with IEEE 802.11b/g/n, 2.4GHz band Support
,
WEP,WPA-PSK and WPA2-PSK Encryption
,
Support recording and playback via micro SD Card, up to 128GB.
C
ompatible with ONVIF Protocol H.265 main profile video compression format.
Parameters
Camera
Image Sensor
1/2.9" 1080P CMOS
1920(H)x1080(V)
WDR
Digital WDR
Noise Reduction
3D DNR
Day/Night control (IR-Cut)
Auto(ICR) / Color / Black&White
Motion detection
Supported
SD Card
Supported, up to 128GB
IR distance
8m
Lens
Focal Length
2.8mm
Max Aperture
F2.4
Focus control
Fixed
Diagonal Angel of View
140°
Video
Encode
Resolution
1080P (1920x1080) VGA (640x352)
Video Bitrates
64Kbps ~ 8Mbps
Video Frame Rate
25fps@1080P
Image snapshot
Supported
General
Power Supply
DC 5V/1A
Hard Reset
Supported
Power Consumption
<6W
Working Environment
Dimensions
Φ70x109mm
Weight
113.5g
Network
Network Protocol
HTTP, FTP, TCP/IP, UDP, SMTP, DHCP, NTP,
UPNP, DDNS
Smart Phone
iOS(9.0 or above),Android(5.0 or above)
Wi-Fi (802.11b/g/n), 2.4G only, supports
WEP/WPA-PSK/WPA2-PSK encryption
P2P
Supported
Pairing with system
Tap “+” Add accessory to scan QR codes printed on the back of
the camera base
. Y
ou will be guided to connect to Camera by
connecting the AP’s name which start
s
with IPcam***.
Wi
-
Fi Settings
• After switch
ing
back to
the
App, you will have the page to
set up
the
Wi
-
Fi of the camera.
• Select your WiFi router in the list, then input Password and
Save.
• The camera will start to connect to the router
. Y
ou will hear
the camera play a special tone that means it was connected
to the router successfully.
• Name it and set the password, then
start
to use
the
camera.
User Guide
VIGIFC
Indoor Fixed Camera
H.265 main profile
Wi-Fi
Setting Up Camera
Power up
Insert power cable into the Micro-USB slot on the
camera.
• The camera will power up and you will hear the prompt voice
to show you it is waiting for
the
WiFi settings.
Reset
Power
-10
℃
~+55
℃
,10%~90% RH
