Oki Data CONFIDENTIAL
45850101TH Rev.1
2-26
2. TROUBLESHOOTING PROCEDURES
No. Category PJL Status
Code
Panel messages
Description
109 Error
30936
Unauthorized Scan
Error Code: X01
Notifies that a particular pattern is detected
(banknote detection) during scanning for
photocopy.
The message shall be written in English even
when the MFP is bound for Japan.
The exact words shall be displayed and they shall
not be shortened.
The message shall not be translated into any
other languages.
110 Error
A decoding error
occurred.
Check the image
data.
111 Error
-
USB Memory
disconnected.
Indicates that the USB memory is disconnected
while PrintFromUSBMemory is running. Reading
of the image file is cancelled.
112 Error
-
Cannot open the
file.
Notifies that the specified file cannot be opened.
113 Error
-
Cannot read the
file.
Notifies that processing has failed, for instance,
because of a fault in the equipment in which the
data was to be stored.
114 Error
40565
Document jam has
occurred.
Open the automatic
document feeder
(ADF) cover on the
scanner to check.
<%CODE%>
Press the [Details]
button for help.
At machine initial time (power-on, restoration time
from sleep), a manuscript was detected on a set
sensor.
115 Error
409
40585
Printing was
stopped. Rear
Output Tray was
opened during
printing.
Open the Output
Tray.
Error code: 409
Indicates that an error has occurred as the faceup
stacker was operated during printing and printing
stopped.
116 Error
-
Insufficient memory
occurred during
Fax Tx reservation.
The same type of status as STATUS_ID_FAX_
S_MEMORY_OVERFLOW Indicates that memory
overflow has occurred during ScanToFax.
117 Error
-
Insufficient
memory.
Similar error to STATUS_ID_FAX_S_MEMORY_
OVERFLOW
Indicates that memory overflow has occurred
while fax is being received.
No. Category PJL Status
Code
Panel messages
Description
118 Error
(ONLINE)
40596
119 Error
(ONLINE)
40597
120 Error
517
-
Wireless startup
failed.
Please see Help for
details.
121 Error
-
This wireless
firmware version
does not operate
on this device.
Please see Help for
details.
122 Error
-
Wireless settings
are incomplete.
Please see Help for
details.
123 Error
-
Not connected to
wireless access
point.
Please see Help for
details.
124 Error
40427
Firmware Update
Error
Please try again.
If network doesn't
work, please try
firmware update
over USB.
125 Error
410
411
412
413
+
Information
-
Use genuine
%COMPANY_
NAME%
consumables for
max performance.
This should be appeared after the
toner empty error messages when
OKIORIGINALCONSUMABLEDISPLAY is ON to
display this.
