45850101TH Rev.1
3-16
Oki Data CONFIDENTIAL
3. MAINTENANCE MENUS
3.4.2
Normal self-diagnostic mode (Level 1)
The normal self-diagnostic mode menus are as follows:
Option
Self-diagnosis Menu
Adjustment
1
Switch scan test
SWITCH SCAN
Checks input sensor and
switch
2
Motor clutch test
MOTOR&CLTCH
TEST
Tests the operation of a motor
or clutch.
3
Test printing
TEST PRINT
Prints a test pattern stored in
the PU.
4
Color registration
adjustment test
REG ADJUST TEST
Judges the color registration
adjustment mechanism as
pass or fail.
5
Density
adjustment test
DENS ADJ TEST
Judges the density adjustment
mechanism as pass or fail.
6
Consumable
counter display
CONSUMABLE
STATUS
Displays the usage of a
consumable.
7
Consumable life
counter display
PRINTER STATUS
Displays the life counter of a
consumable.
8
Factory/Shipping
mode switching
FACTORY MODE
SET
Switches between Factory and
Shipping modes
9
Fuse status
display
Displays the status of a fuse.
10 Engine parameter
setting
SENSOR SETTING
Sets whether to enable
or disable error detection
performed by each sensor.
11 Display of LED
head serial
number
LED HEAD DATA
Displays the serial number of
LED head data.
12 NVRAM
parameter setting
NVRAM
PARAMETER
Must not be used.
13 Drum Manual
Cleaning
DRUM CLEANING
Cleans a drum manually.
3.4.2.1 Entering self-diagnostic mode (level 1)
Note!
Entering the System Maintenance mode of MC853/MC873/ES8453/ES8473
requires a password. Refer to 3.1 Maintenance Menu for description on it.
1.Select the "Device Settings" by touch panel.
2.Enter [#]
→
[0]
→
[1]
→
[0]
→
[3]
→
[*] at "Device Settings" display.
3.Enter the password "000000" and touch [OK] button.
4.Select the "Print Maintenance"
→
"Engine Diag Mode"
3.4.2.2 Exiting self-diagnostic mode
1. Turn of the printer and, after ten seconds, turn it on.
