Oki Data CONFIDENTIAL
45850101TH Rev.1
2-6
2. TROUBLESHOOTING PROCEDURES
No. Category PJL Status
Code
Panel messages
Description
19 Normal
10003
Warming up
Warming up.
20 Normal
10963
Warming up.
Indicates that printing has been suspended for a
while due to high temperature of the drum, or the
printer is in a wait state to cope with heat at the
time of switching narrow paper to wide paper.
21 Normal
10094
The MFP in power save mode.
LCD back light is turned off.
Green LED is turned on.
22 Normal
10058
Preparing ...
Executing Auto Color Adjusting
23 Normal
10994
10988
Preparing ...
Executing Auto Density Adjustment.
Status code 10988 corresponds to density
reading , thereto 10994 corresponds to density
adjusting.
24 Normal
40988
PU downloading ... Downloading PU F/W (This is not user-level error)
This function is secret to users. Therefore, this
status does not occur in a user environment.
It occurs during downloading firmware of option
tray.
25 Normal
10881
Updating firmware.
Do not turn OFF
the power.
Downloading scanner unit (Scanner, Fax, Panel)
FW.
26 Normal
30956
Wait a moment.
Network
Configuration
writing ...
This appears during the NIC configuration data is
storing into the flash memory, as the setting was
changed.
27 Normal
30993
Wait a moment.
Network initializing
...
This appears when the NIC initialization is
occurred, as the setting was changed.
28 Normal
10894
Cancelling ...
Indicates that copy job is cancelling.
No. Category PJL Status
Code
Panel messages
Description
29 Normal
10863
Scanning ...
Indicates that it is scanning of documents.
The unit of "Page" is "Impression".
In duplex scanning, "Page" counter is increased
by 1 when the front side of sheet scanning
started, and the counter is increased by 1 when
the back side scanning started.
%LOCATION_INFO%: Location Information (
（
Scan To E-mail, Scan To Network PC only)
%SCAN_PAGE%: the number of current
scanning page.
%DOC_SIZE%: Document size
Scan Size setting is "Auto": the detected
document size.
Scan Size setting isn't "Auto": the selected scan
size.
--------------------------------------------
Indicates that it is scanning of documents by
Scan To USBMemory.
The unit of "Page" is "Impression".
In duplex scanning, "Page" counter is increased
by 1 when the front side of sheet scanning
started, and the counter is increased by 1 when
the back side scanning started.
%SCAN_PAGE%: the number of current
scanning page.
%DOC_SIZE%: Document size
Scan Size setting is "Auto": the detected
document size.
Scan Size setting isn't "Auto": the selected scan
size.
--------------------------------------------
Indicates that it is scanning of documents by
Push Scan/PC Scan.
%AP_INFO%: Selected application setting.
While a document is scanned by FAX memory
transmission, status LED does not illuminate
because this status is not raise.
