45850101TH Rev.1
3-41
Oki Data CONFIDENTIAL
3. MAINTENANCE MENUS
3.6 Manual density adjustment setting
MC853/MC873/ES8453/ES8473 is shipped with the auto density adjustment mode enabled.
When the mode is disabled by a user, the printer may print density out of adjustment while
being used. Manually perform density adjustment setting when the printer prints an improper
density.
Note!
The setting must be performed with the printer in a static state. Do not perform
it while the printer warms up.
(1) Enter the Admin Setup menu.
(2) Select and execute [Print Setup]-[Color Menu]-[Adjust Density] in the menu.
Auto density adjustment starts, the operator panel display providing a message
stating that density is being adjusted.
