45850101TH Rev.1
3-14
Oki Data CONFIDENTIAL
3. MAINTENANCE MENUS
Numerical
keypad
Self-diagnostic
mode layout
(Overall)
(1) Menu option display switching
The level in a shaded area XXXXX can be displayed only from
another one.
Use the
[2]
or
[8]
button to display the menu option shown in a
non-shaded area XXXXX .
LEVEL0- engine status display
Engine status display
Each voltage display category in
printing
Toner sensor monitor
Toner pulse count monitor
RFID tag noise test monitor
Motor control evaluation function
Error code
DIAGNOSTIC MODE XX.XX.XX -MODE
SWITCH SCAN
MOTOR&CLTCH TEST
TEST PRINT
REG ADJUST TEST
DENS ADJUST TEST
CONSUMABLE STATUS
PRINTER STATUS
FACTORY MODE SET
SENSOR SETTING
LED HEAD DATA
NVRAM PARAMETER
DRUM CLEANING
POWER ON
Normal operation mode
Press
[6]
Press
[6]
No buttons pressed
1.Select the "Device Settings" by touch panel.
2.Enter [#]
→
[0]
→
[1]
→
[0]
→
[3]
→
[*] at "Device Settings" display.
3.Enter the password "000000" and touch [OK] button.
4.Select the "Print Maintenance"
→
"Engine Diag Mode"
LEVEL0
(1) Menu option display switching
Use the
[4]
or
[*]
or
[2]
or
[8]
button to display the option shown in a
shaded area XXXX .
Use the
[2]
or
[8]
button to display the menu option shown in a non-
shaded area XXXX .
Each voltage display
category during printing
Transfer (TR) voltage(1)
*1
Transfer (TR) voltage(2)
*1
Charge (CH) voltage(1)
Charge (CH) voltage(2)
Supply (SB) voltage
Development (DB)
voltage
Environmental level
Development (DB)
voltage (AFTER)
Development (DB)
voltage (BEFORE)
Transfer (TR) voltage(3)
*1
[2]
[8]
*1: Pressing the
[#]
button switches the
voltage, which is
displayed for a color,
to that for another
color.
Toner sensor
monitor
Toner sensor
status monitor
display
[2]
[8]
Toner pulse count monitor
Each color toner FULL/
Number of LOW-pulse
detections
[4]
[*]
Error code
Error code display, etc.
Engine status display
Heater temperature
Environmental information
Low-voltage thermistor temperature
Belt thermistor temperature
Press
[4]
[2]
[8]
Motor control evaluating functions
Regist Motor Constant-Speed Timer
Value/ Environmental Temperature
Fusing Motor Constant-Speed Timer
Value/ Fusing Target Temperature
ID Motor Constant-Speed Timer Value
BELT Motor Constant-Speed Timer Value
[8]
RFID tab noise test monitor
Display of number of noise detections/ Toner K error
Display of number of noise detections/ Toner Y error
Display of number of noise detections/ Toner M error
Display of number of noise detections/ Toner C error
[2]
3.4 Self-diagnostic mode
This section describes LEVEL 0 and LEVEL 1.
3.4.1
Operator panel
The following description on operating the self-diagnostic is provided, premised on the
following operator panel layout:
