Oki ES8434, Руководство для продвинутых пользователей

Страница: 120 / 195

- 120 -
5. Management / Setting the Printer
If you use an SNMP manager that supports SNMPv3, you can encrypt the machine
management with SNMP.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [SNMP] > [Settings].
5
Specify detailed settings by following the on-screen instructions.
6
Click [Submit].
The new settings take effect when the network function of this machine restarts.
• You can confirm and change the machine settings with a commercially available SNMP manager tools. For the MIB
in the machine, refer to the "Software DVD-ROM", and check the MIB definitions file in the [Misc] > [MIB Files]
folder.
This machine supports IEEE802.1X authentication. IEEE802.1X authentication is performed
after IEEE802.1X authentication is enabled on the web page of this machine and the
machine is reconnected is to the authentication switch.
Setting by Using EAP-TLS
This section describes how to set EAP-TLS, which is an EAP authentication type.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [IEEE802.1X].
5
Select [Enable] for [IEEE802.1X].
6
Select [EAP-TLS] for [EAP Type].
7
Enter a user name in [EAP User].
8
Select [Do not use SSL/TLS Certificate for EAP authentication], and then click
[Import].
9
Enter the file name of the certificate.
You can only import a PKCS#12 file.
10
Enter the password of the certificate, and then click [OK].
11
Select [Authenticate Server], and then click [Import].
12
Enter the file name of the CA certificate, and then click [OK].
Specify the certificate of the certificate authority (CA) to be used when authenticating
RADIUS server. You can import a PEM, DER, and PKCS#7 file.
13
Click [Submit].
The new settings take effect when the network function of this machine restarts.
Using SNMPv3 Using IEEE802.1X (Wired LAN)