Oki ES8434, Руководство для продвинутых пользователей

Страница: 118 / 195

- 118 -
5. Management / Setting the Printer
You can control access to the machine by using an IP address. You can set whether to allow
for setting or printing from a specified IP address. IP filtering is disabled by factory default.
• Be sure to specify the correct IP address. An incorrect entry of an IP address does not allow for access to the printer
by using the IP protocol.
• If you enable IP filtering, access to hosts that are not specified in this setting is rejected.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [Security] > [IP Filtering].
5
Specify detailed settings by following the on-screen instructions.
• If nothing is registered in [Administrator's IP Address to Register], any access to the machine may not be
allowed depending on the specified IP address range.
• If you use a proxy server, [Your Current Local Host/Proxy IP Address] and the IP address of your host may not
match.
6
Click [Submit].
The new settings take effect when the network function of this machine restarts.
• You can use only IPv4 for IP filtering.
You can control access to the machine by using a MAC address. You can allow for or reject
access from a specified MAC address.
• Be sure to specify the correct MAC address. An incorrect entry of a MAC address does not allow for access to the
machine from a network.
1
Open the Web page of this machine.
Open the Web Page of This Machine
2
Log in as the administrator.
3
Select [Admin Setup].
4
Select [Network] > [Security] > [MAC Address Filtering].
5
Specify detailed settings by following the on-screen instructions.
• If nothing is registered in [Administrator's MAC Address to Register], access to the machine may not be
allowed depending on the specified MAC address.
• If you use a proxy server, [Your Current Local Host/Proxy MAC Address] and the MAC address of your host
may not match.
6
Click [Submit].
The new settings take effect when the network function of this machine restarts.
• You cannot specify to accept or to reject for each address.
Limiting by Using an IP Address (IP Filtering) Limiting by Using a MAC Address (MAC Address Filtering)