- 87 -
5. Management / Setting the Printer
*1 Factory default setting values are different according to the country or region.
*2 The values are displayed with the unit set in [Admin Setup] > [Tray Setup] > [Unit of Measurement].
• Menu > System Adjust
Tray1 Config
Paper Size
Cassette Size
Selects a paper size for Tray 1.
X Dimension
210 millimeter
or 8.5 inch *
2
Sets a width of a custom paper for Tray 1.
Y Dimension
297 millimeter
or 11.0 inch *
2
Sets a length of a custom paper for Tray 1.
Media Type
Plain
Selects a paper type for Tray 1.
Media Weight
Light
Selects a paper weight for Tray 1.
Legal Paper
Legal14
Sets a legal paper size for Tray 1.
Other Size
16K
(184 x 260 mm
) [SEF]
Sets other standard paper size for Tray 1.
Tray2/3/4/5
Config *
* Displayed
when an
optional tray is
installed.
Paper Size
Cassette Size
Selects a paper size for Tray 2/3/4/5.
X Dimension
210 millimeter
or 8.5 inch *
1
Sets a width of a custom paper for Tray 2/3/4/5.
Y Dimension
297 millimeter
or 11.0 inch *
1
Sets a length of a custom paper for Tray 2/3/4/5.
Media Type
Plain
Selects a paper type for Tray 2/3/4/5.
Media Weight
Light
Selects a paper weight for Tray2/3/4/5.
Legal Paper
Legal14
Sets a legal paper size for Tray 2/3/4/5.
Other Size
16K
(184 x 260 mm
) [SEF]
Sets other standard paper size for Tray 2/3/4/5.
Paper Feed
Tray1
Selects a paper tray.
Auto Tray Switch
On
Sets whether to enable the auto tray switching function.
Tray Sequence
Down
Sets the priority of tray order for auto tray selection/auto tray
switching.
Duplex Last Page
Skip Blank
Page
When [Skip Blank Page] is selected, the last page of an odd-
numbered duplex print job is printed in simplex.
When [Always Print] is selected, the printer always prints a
document in the duplex mode if the duplex mode is selected.
Some applications may not work properly.
Item
Factory
Default
Description
Power Save Time
1 minute
Sets how many minutes the printer waits before activating the
power save mode.
Available range: 1 minute, 2 minutes, 3 minutes, 4 minutes,
5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Item
Factory
Default
Description
Sleep Time
15 minutes
Sets the time to switch from the power save mode to the
sleep mode.
Available range: 1 minute, 2 minutes, 3 minutes, 4 minutes,
5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Auto Power Off Time
4 hours
Sets the time to switch from the standby mode to the power
off mode.
Available range: 1 hour, 2 hours, 3 hours, 4 hours, 8 hours,
12 hours, 18 hours, 24 hours
Silent Mode
On
Specifies a print preparation operation when entering standby
status from Sleep mode.
[On]: It is quiet as there is no print preparation.
[Off]: There is a rotation noise of the image to perform print
preparation but you can start first printing early.
Clearable Warning
ONLINE
Sets the timing for deletion of clearable warnings.
Auto Continue
Off
Sets whether to recover the printer automatically when a
memory overflow or tray requesting occurs.
Manual Timeout
60 seconds
Sets how many seconds the printer waits for the paper to be
fed from the manual paper tray.
Available range: Off, 30 seconds, 60 seconds
Timeout InJob
40 seconds
Sets how many seconds the printer will wait before force
printing a job after the data stops coming.
Available range: Off, 5 seconds, 10 seconds, 20 seconds,
30 seconds, 40 seconds, 50 seconds, 60 seconds,
90 seconds, 120 seconds, 150 seconds, 180 seconds,
210 seconds, 240 seconds, 270 seconds, 300 seconds
Timeout Local
40 seconds
Sets how long each port is left opened after a job is complete.
(The network is excluded.)
This time can be set in the range 0 to 300 seconds in 5-
second increments.
Timeout Network
90 seconds
Sets how long the network port is left opened after a job is
complete.
This time can be set in the range 0 to 300 seconds in 5-
second increments.
Low Toner
Continue
Sets whether to continue or stop printing when a low on toner
error occurs.
Print Mode w/o Color Toner
Alarm
Specifies the action when there is an empty color toner.
[Alarm]: The machine stops without printing the color print
job. Replace the toner cartridge with a new one.
[Cancel]: Cancels a new color print job automatically.
Replace the toner cartridge with a new one.
Jam Recovery
On
Sets whether the printer will attempt to re-print any pages lost
due to a paper jam once the jam has been cleared.
When [Off] is set, print processing that included pages which
generated a paper jam is canceled.
Item
Factory
Default
Description
Содержание ES8434
Страница 1: ...C824 C834 C844 ES8434 Advanced Manual...
Страница 155: ...155 6 Utility Software Storage Manager plug in Create or edit a file to download to a device...
Страница 195: ...47095402EE Rev6...