NyQuest Innovation Labs Q-Code, Руководство пользователя

Страница: 290 / 346

Q-Code User Manual
Ver. 7.0 2021/11/30 290
5.4.2.16 MISC Command
MISC Command
Action Mark State Input State Wave Mark State Melody Mark State NoteOn State
Key_CLR Key_ON Key_OFF Stop Pause(n)
Resume(n) ReadChannel PauseDown ResumeUp Audio_ON
Audio_OFF RampUp RampDown WDT_CLR Repeat
END ReadRollingCode(Ri:Rj:Rk:Rl:Rm) Debounce(Time) -
5.4.3 Command Table of NY5+
5.4.3.1 Arithmetic Command
Arithmetic Logic Command
Var1 = Var2 Var1 = Var2 + Var3 Var1 = Var2 – Var3 Var1 = Var2 * Var3
Var1 = Var2 / Var3 Var1 = Var2 % Var3 Var++ Var--
Var1 = Var2 & Var3 Var1 = Var2 | Var3 Var1 = Var2 ^ Var3 Var1 = Var2 << Var3
Var1 = Var2 >> Var3 !Var - -
5.4.3.2 Conditional Jump
Condition Jump Command
Var = Var ? Path Var != Var ? Path Var >= Var ? Path Var <= Var ? Path Var > Var ? Path
Var < Var ? Path Px = data?Path Px != data?Path Px.n = 0?Path Px.n != 0?Path
Px.n = 1?Path Px.n != 1?Path Px[1 X 0 X]?Path Vol = n?Path Vol !=n ?Path
ChUsed?Path Voice(Ch)?Path PaueV(Ch)?Path Melody?Path PauseM?Path
Delay(n)?Path Action(Ch)?Path PauseA?Path PWMIO?Path
PausePWM?Path CheckSum?Path RandomL=data?Path RandomH=data?Path
RandomL!=data?Path RandomH!=data?Path Random=data?Path Random!=data?Path
Switch(Ri) = [Path0, Path1, Path2,..Path15] Switch(Px) = [Path0, Path1, Path2,..Path15]
Switch(RandomL) = [Path0, Path1,..Path15] Switch(RandomH) = [Path0, Path1,..Path15]
Switch(Px[d x d x]) = [Path0, Path1, Path2….Path15]
Switch(Xi)=[Path0, Path1, Path2,..Path255] Switch(Random)=[Path0, Path1,Path2,..Path255]
5.4.3.3 I/O Command
4-bit I/O Command
Ri = Px Ri=PxM Ri.n = Px.n PxM = data PxM = Ri