Q-Code User Manual
Ver. 7.0 2021/11/30
19
file.
2.1.5 [Debug] Menu
The following menu will appear by clicking [Debug].
This feature is for the need of using ICE to debug while users are using
Q-Code
. For using this feature,
ICE or NX_Programmer must be connected to the USB port of the computer first
Download To SPI Flash:
Download data to SPI Flash. (Only NY6 series supports this function.)
Full Download:
Download the full program and data to ICE and SPI Flash. It needs computer to
connect the NX_Programmer.User can choose download to ROM, SPI Flash or both.
(This function only supports NX1 series)
Free Run:
Execute ICE, and the process cannot be interrupted.
Run:
Execute ICE, and the process can be interrupted for debugging. (This function only supports
NX1 series)
Stop:
Stop ICE.
Reset:
Reset without power-off.
Pause:
Pause ICE.
Step:
Execute ICE step by step.
Toggle Breakpoint:
Add or delete the breakpoint.
NY4 / NY5 / NY5+
/ NY7 / NY9T
NY6
NX1
Configure
Download