Q-Code User Manual
Ver. 7.0 2021/11/30
168
Label:
record block defined in
[Record]
.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not support this command.
2. This command is not available if Realtime Erasing is enabled.
Ex.
EraseR($Rec0)
4.6.5 WaitEN
If Record Erasing is executing, it will execute next command after Record Erasing ends. Otherwise, it
will immediately execute the next command.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not support this command.
2. EraseR = E WaitRN.
3. This command is not available if Realtime Erasing is enabled.
Ex.
[Path]
TR1: EraseR($Rec0)
TR2: EraseRS($Rec0), WaitEN
; The result is the same as TR1.
4.7 Sentence Command
Sentence Command
4.7.1 PlayS(Parameter)
This command enables the program to play a sequence of voice combination.
The format of command is shown as the followings:
PlayS(Parameter) { *n } { &[BG1 {,BG2 {,BG3}} ] }
PlayS:
execute next command after sentence play ends.
Parameter:
label of the sentence.
Ex.
PlayS($S1)
n:
numbers of repeated playback.
Ex.
PlayS($S1) *3
NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T supports constant 1 ~ 15.
NX1 supports constant 1 ~ 255.
Note: In NY5+ / NY6 / NY7 / NX1, sentence is designed for combining resource files playback
(Melody, Speech, Action, etc) as single sentence. Therefore, the Sentence section only
allows the Play commands (PlayV / PlayM / PlayA) and Delay commands, other