Q-Code User Manual
Ver. 7.0 2021/11/30
96
Ex.
Use
Q-Visio
to insert A1 ~ A4 marks.
[Action Mark]
;
A1
A2
A3
A4
ActionMark1: AM1
AM2
AM3
AM4
[Path]
PowerOn:
ActionMark1, PlayA(PA.0, Ch1, $A0)
[Background1]
AM1: PB=0x1
; System will execute AM1 when action mark 1 is read.
AM2: PB=0x2
; System will execute AM2 when action mark 2 is read.
AM3: PB=0x3
; System will execute AM3 when action mark 3 is read.
AM4: PB=0x0
; System will execute AM4 when action mark 4 is read.
As shown in the following figure:
3.9.15 Wave Mark
This feature is for user to add the background path action according to the BGP mark in
Quick-IO
file
during the playback of voice file. User can insert Wave Mark anywhere in the voice file to manage the
background actions while using
Quick-IO
for editing files. User can define the Wave Mark status in
[Wave Mark]
section.
The mark number is, for example, M1; there can be as many as 15 such numbers from M1 to M15 with
15 background actions attached to each number. After Wave Marks are defined, users just have to
insert corresponding Wave Mark control codes into
Quick-IO
to activate Wave Mark feature. User can
define the setting of corresponding states up to maximum 255.
Note:
