Q-Code User Manual
Ver. 7.0 2021/11/30
254
4.29.5 Robot1
The effect of robot speech.
Robot1(channel, number)
Channel
: channel to apply robot speech effect.
Number
: the range is between 0 ~ 15.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not support this command.
2. This command is only available for Voice files, no effect on MIDI files.
4.29.6 Robot1_Off
Close Robot1 effect.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not support this command.
2. The Robot1_Off command is available only when Robot1 command is used.
4.29.7 Robot2
To generate the effect of robot speech.
Robot2(Channel, Type,Thres)
Channel
: voice channels.
Type
: The range is 0 ~ 2, means different scales.
Thres
: The noise threshold range is 0~7. The normal voice playback can be set 0 because there is no
external noise.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not support this command.
2. If the program uses 2 channels, the Robot2 only can use 1 channel. 2 channels for the
command at the same time is not allowed.
3. This command is only available for Voice files, no effect on MIDI files.
Ex.
Robot2(ch0, 2,0)
4.29.8 Robot2_Off
Turn off the effect of Robot2.
Note:
1. NY4 / NY5 / NY5+ / NY6 / NY7 / NY9T do not support this command.
2. The Robot2_Off command is available only when Robot2 command is used.