Q-Code User Manual
Ver. 7.0 2021/11/30
106
After clicking on
New Step
, the window is shown below.
User can continue to add the output status by the aforementioned steps.
After clicking on OK,
Q-Code
returns to main window as shown below. The Sentence is also written.
Ex.
[Sentence]
L1: PlayPWMS(@000,$VIO0,1), PA=[A5 A4 0 0], PE=[0 0 0 A6], PlayA(Ch1,$VIO0,4), WaitPN
L2: PlayPWMS(@000,$VIO0,4), PA=[A5 A4 0 0], PE=[0 0 0 A6], PlayA(Ch1,$VIO0,1), WaitPN
L3: PA=[A5 A4 0 0], PE=[0 0 0 A6], PlayA(Ch1,$VIO0,1)
L4: PlayPWMS(@111,$VIO0,1), PA=[A5 A4 0 0], PE=[0 0 0 A6], PlayA(Ch1,$VIO0,1), WaitPN,
Delay(300ms), PlayPWMS(@111,$VIO0,1), PA=[A5 A4 0 0], PE=[0 0 0 A6],
PlayA(Ch1,$VIO0,1), WaitPN
Finish
