manualshive.com logo in svg

NXP Semiconductors PXN2020, Справочное руководство, Страница: 417 / 1376

Поделиться
Скачать
NXP Semiconductors PXN2020 Скачать руководство пользователя страница 417

Semaphores

PXN20 Microcontroller Reference Manual, Rev. 1

Freescale Semiconductor

15-5

Multiple gate values can be read in a single access, but only a single gate at a time can be updated via a 
write operation. 16- and 32-bit writes to multiple gates are allowed, but the write data operand must update 
the state of a single gate only. A byte write data value of 0x03 is defined as no operation and does not affect 
the state of the corresponding gate register. Attempts to write multiple gates in a single-aligned access with 
a size larger than an 8-bit (byte) reference generate an error termination and do not allow any gate state 
changes.

Figure 15-2. SEMA4 Gate n Register (SEMA4_GATEn)

15.3.2.2

Semaphores Processor n IRQ Notification Enable (SEMA4_CP{0,1}INE)

The application of a hardware semaphore module provides an opportunity for implementation of helpful 
system-level features. An example is an optional mechanism to generate a processor interrupt after a failed 
lock attempt. Traditional software gate functions execute a spin-wait loop in an effort to obtain and lock 
the referenced gate. With this module, the processor that fails in the lock attempt could continue with other 
tasks and allow a properly-enabled notification interrupt to return its execution to the original lock 
function.

The optional notification interrupt function consists of two registers for each processor: an interrupt 
notification enable register (SEMA4_CP

n

INE) and the interrupt request register (SEMA4_CP

n

NTF). To 

support implementations with more than 16 gates, these registers can be referenced with aligned 16- or 
32-bit accesses. For the SEMA4_CP

n

INE registers, unimplemented bits read as zeroes and writes are 

ignored.

Figure 15-3. Semaphores Processor n IRQ Notification Enable (SEMA4_CP{0,1}INE)

Offset: SEMA n (n = 0, 1, 2,..., 15)

Access: User read/write

0

1

2

3

4

5

6

7

R

0

0

0

0

0

0

GTFSM

W

Reset

0

0

0

0

0

0

0

0

Table 15-2. SEMA4_GATEn Field Descriptions

Field

Description

GTFSM

Gate Finite State Machine. The hardware gate is maintained in a three-state implementation, defined as:
00 The gate is unlocked (free).
01 The gate has been locked by processor 0.
10 The gate has been locked by processor 1.
11 This state encoding is never used and therefore reserved. Attempted writes of 0x03 are treated as no operation 

and do not affect the gate state machine.

Note: The state of the gate reflects the last processor that locked it, which can be useful during system debug. 

Offset: SEMA 0x0040 (SEMA4_CP0INE)

SEMA 0x0048 (SEMA4_CP1INE)

Access: User read/write

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

R

INE0

INE1

INE2

INE3

INE4

INE5

INE6

INE7

INE8

INE9 INE10 INE11 INE12 INE13 INE14 INE15

W

Reset

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Содержание PXN2020

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов