■ Reception interference caused by wireless
LAN devices
★ As this terminal's Bluetooth device
and wireless LAN devices use the
same frequency (2.4 GHz), reception
interference may occur or the
communications speed may lower if you
use the Bluetooth device near the wireless
LAN devices. Also, you may hear noise
or have a connection problem. In these
cases, do the following:
- Keep the Bluetooth device over 10 m
away from a wireless LAN device.
- Within 10 m, turn off either the Bluetooth
device or the wireless LAN device.
■ Pass code (PIN) of Bluetooth function
★ Pass code (PIN) is an authentication
code to enter when accessing Bluetooth
devices for the first time to recognize and
permit the connection each other. Entering
the same pass code (PIN) (up to 16 single
byte alphanumeric characters) on each
sending/receiving device is required.
★ On this terminal, pass code may be
displayed as "PIN".
Turning ON Bluetooth Function to
Make this terminal Discoverable
a
From the Home screen,
u
"System settings"
u
"Bluetooth"
b
Place a check mark on "Bluetooth"
c
"Make phone visible"
★ This terminal can be detected by another
Bluetooth device for approx. 120 seconds.
Note
★ When you do not use Bluetooth function,
turn it OFF to save the battery.
★ The setting of the Bluetooth ON/OFF
is not changed even when the power is
turned off.
Changing the Name of this Terminal
You can change the name of this terminal to
display on another device when communicating
via Bluetooth.
a
From the Home screen,
u
"System settings"
u
"Bluetooth"
b
Tap the name of the terminal
c
Input a name
u
"Save"
157
File Management