NTT docomo FOMA SO906i, Руководство пользователя

Страница: 464 / 550

462
Appendix/Exter
nal De
vices/T
roub
leshooting
Trouble Cause and Remedy
An image other than that you set
is displayed for an incoming call.

If multiple images are set for the incoming image for voice/
videophone call, the image is displayed in the following order of
priority (P.92, 96, 102).
1. Des call display set in the Phonebook
2. Des call display set in the Group setting
3. Incoming image set in the Incoming set
When an i-motion or Chaku-Uta Full
®
is set for the ring tone or an i-motion
is set for the incoming image, however, the order of priority may vary.
A ring tone other than that you
set sounds for an incoming call.  If multiple ring tones are set for voice/videophone call, the ring tone
sounds in the following order of priority (P.93, 96, 103, 415, 418).
1. Ring tone set in the Number Setting (when a call is placed to an
Additional No. for the Multi Number)
2. Des phone tone set in the Phonebook
3. Des phone tone set in the Group setting
4. Ring tone of the Ringtone for Number B of 2in1
5. Ring tone set in the Incoming set
When an i-motion or Chaku-Uta Full ® is set for the ring tone or an i-motion
is set for the incoming image, however, the order of priority may vary.
A ring tone other than that you
set sounds for an incoming mail.  If multiple ring tones are set for mail, the ring tone sounds in the
following order of priority (P.93, 96, 103).
1. Des mail tone set in the Phonebook
2. Des mail tone set in the Group setting
3. Ring tone set in the Incoming set
When an i-motion or Chaku-Uta Full ® is set for the ring tone,
however, the order of priority may vary.
The incoming indicator in the
color other than that you set
lights for an incoming call or
mail.

If multiple incoming indicators are set for voice call/videophone
call/mail, the incoming indicator flashes in the following order of
priority (P.93, 96, 103).
1. Select phone/mail Illum. set in the Phonebook
2. Select phone/mail Illum. set in the Group setting
3. Indicator color set in the Incoming set
The incoming indicator flashes in
certain cycle.

Check if the Missed call is set to [ON] (P.119).
The charge indicator stays lit.

Check if [Charging] of the Backlight always on is set to [ON] (P.115).
In this setting, it may take time to complete charging, but this is not
a malfunction.

Check if you use a function such as the videophone, data
communication, and i- α ppli while charging the battery.
In this case, it may take time to complete charging, but this is not a
malfunction.
The keypad sound is not heard.  Check if the Keypad sound volume is set to [OFF] (P.104).
 Check if the Manner mode is set (P.108).
The display is slow to react on
pressing a key.  This may occur when a large amount of data is stored in the FOMA
terminal.
The Total calls cost does not
increment.  It does not increment if the counter reaches the upper limit value
(about ¥16,770,000) of total calls cost of UIM. Reset the counter to
¥0 (P.389).
Data communication does not
start.

Check if you use USB HUB. If you use USB HUB, it may not work
properly.
Cannot watch 1Seg

Check if you are outside of the Terrestrial digital TV broadcasting
service area or in the places with the weak radio wave condition.
 Check if the UIM card is inserted.

Check if the channel is set (P.267).