NTT docomo FOMA SO906i, Руководство пользователя

Страница: 129 / 550

127
Secur
ity Settings
Restricting Placing/
Receiving Calls
<Self mode>
You can disable all functions that involve calls
or communication, such as placing/receiving a
voice or videophone call, originating/receiving
a PushTalk call, and sending/receiving mail.
You cannot use infrared communication,
infrared remote control, and iC communication,
either.
1
From the Menu, select [Settings] → [Call]
→ [Self mode] and press .
The screen for confirming whether to set the Self
mode appears.
To cancel the Self mode
Select [Yes] on the screen for confirming whether
to cancel the Self mode.
2
Select [Yes] and press .
The Self mode is set and “ ” appears.
●
Even if the Self mode is set, you can call
emergency numbers (110, 119, and 118).
The Self mode is canceled after you call an
emergency number.
● If there is an incoming voice call when the
Self mode is set, the caller hears a guidance
informing that the FOMA terminal is outside of the
service area or the FOMA terminal is powered
off. When using the DoCoMo Voice Mail Service
or Call Forwarding Service, these services can
be used in the same manner as when the FOMA
terminal is powered off.
● If you receive a PushTalk call when the Self mode
is set, the call is disconnected. If the received
call is for the PushTalk communication among
several persons, the message “
Disconnect”
appears in the On PushTalk display of the
members.
● Even if the Self mode is set, you can use the data
transfer by using the MTP mode/microSD mode
or OBEX™ communication (P.361, 362, 422).
Restricting Displaying Personal Data/
Functions to Be Used
<Personal data lock>
You can set your personal information such
as the Phonebook and Schedule data not to
display or functions such as i-mode, mail,
displaying an image, playing back music data,
etc. not to be used. You can set some functions
individually whether to lock at the Lock target
setting.
The locked functions can be cancelled
temporarily by entering the Security code.

When the Reject unknown is set, you cannot set the
Personal data lock.
1
From the Menu, select [Settings]
→
[Lock/
Security] → [Pers. data lock] and press
.
The Security code screen appears.
2
Enter the Security code and press
(OK).
The Personal data lock setting display appears.
3
Select [ON] at [Set] and press .
The Personal data lock is set and “ ” appears. The
functions selected at the Lock target setting (P.128)
and following functions are locked.
- ToruCa
- GPS
- Call Cost/Duration
- Receiving data using the iC communication ※
- Text memo - Reset ※
※
You cannot cancel the lock by entering the
Security code (P.129).
To cancel the Personal data lock
Select [OFF]. The Personal data lock is canceled
and “
” disappears.
Continued