NTT docomo FOMA SO906i, Руководство пользователя

Страница: 397 / 550

395
Con
v
enient Functions
Using the Switch to Receive a Call
1
When receiving a call, press the switch
on the Earphone/Microphone for over a
second.
The beep sounds and the call is connected.
2
P r e s s t h e sw i t ch o n t h e E a r p h o n e /
Microphone for over a second to hang up.
The beep sounds and the call is disconnected.
● When you answer a videophone call using the
switch on the Earphone/Microphone, a substitute
image is sent to the caller.
● You cannot end communication using the
switch on the Earphone/Microphone during
PushTalk communication. Press
to end
communication.
Receiving a Call Automatically
with Earphone
<Auto answer setting>
You can set to automatically answer a voice or
videophone call when the Flat-plug Earphone/
Microphone with Switch (optional), etc. is
connected.
1
From the Menu, select [Settings] → [Call]
→ [Headset setting] → [Auto answer
setting] and press .
Ａｕｔｏ ａｎｓｗｅｒ ｓｅｔｔｉｎｇ
Ｓｅｔ ＯＦＦ
Ｔｏ ａｎｓｗｅｒ ００５ ｓｅｃ
（０００−１２０）
2
Select [ON]/[OFF] of the Auto answer
setting at [Set].
3
Enter the time before receiving a call
automatically at [To answer].
Enter from 000 to 120 seconds.
4
Press (Complete).
The Auto answer setting is set.
● When you receive a videophone call, a substitute
image is sent to the caller.
● When the Record message, Voice Mail Service,
Call Forwarding Service, and Auto answer
setting are set simultaneously, and if you want to
give priority to the Auto answer setting, set the
time before starting the answering message for
the Auto answer setting shorter than that for the
Record message and the ring time for the Voice
Mail and Call Forwarding Services.
Resetting to the Default
Settings
<Reset settings>
You can reset the settings of each function to
the default settings. For the functions that are
reset by the Reset settings and the default
settings of these functions, see the list of reset
items (P.397) and the list of menus (P.438).
1
From the Menu, select [Settings] →
[ M a n a g e m e n t ] → [ R e s e t ] → [ R e s e t
settings] and press .
The Security code screen appears.
 The Reset display also appears by pressing
for over a second in the stand-by display. Select
[Reset settings] and press
.
2
Enter the Security code and press
(OK).
The screen for confirming whether to reset all
settings appears.
3
Select [Yes] and press .
The settings are reset.