NTT docomo FOMA SO906i, Руководство пользователя

Страница: 414 / 550

412
Netw
or
k Ser
vices
2
Set each item.
Menu item Operation
Activate ※ S e l e c t [ A c t i va t e ] → [ A c t i va t e ] /
[ S e t + A c t i v a t e ] ( → E n t e r t h e
forwarding number and ring time) →
[Yes].

When you select [Set+Activate],
y o u c a n s e t t h e f o r w a rd i n g
number (within 26 digits) and
ring time (000 to 120 seconds)
and activate the Call Forwarding
Service.
 When 2in1 is set to the B mode,
you cannot select the method of
activating the Call Forwarding
Service.
Deactivate ※ Select [Deactivate] → [Yes].
Change FWD
number S e l e c t [ C h a n g e F W D nu m b e r ]
→ Enter the forwarding number
(within 26 digits) → Select [Set]/
[Set+Activate].

When 2in1 is set to the B mode,
select [Change FWD number]
→ enter the forwarding number
(within 26 digits) → select [Yes].
If FWD number
busy Set whether to connect to the
Voice Mail Service Center when the
forwarding number is busy.
Select [If FWD number busy] → [Not
connect]/[Connect].
Check setting Select [Check setting].
 When 2in1 is set to either the
B or Dual mode, the screen for
selecting either Number A or
Number B appears.
※ When 2in1 is set to the Dual mode, the screen for
selecting either Number A or Number B appears.
● To set on/off of the Call Forwarding guidance,
press in the stand-by
display and operate as instructed by the
guidance.
Using the Nuisance Call
Blocking Service
The Nuisance Call Blocking Service prevents
receiving a “nuisance call” such as prank
phone calls. When you set the Bar Nuisance
Calls, further calls from registered nuisance
call numbers are automatically rejected and
the call rejection guidance is played back on
the caller’s phone.

The ring tone does not sound when there is an
incoming call from the saved phone number. The
call is not saved in the Received record, either.

When you receive a videophone call from a caller
who is saved as a nuisance caller, it is disconnected
after playing back the call rejection video guidance
on the caller’s phone.
1
From the Menu, select [Settings] →
[Management] → [NW Services] → [Bar
Nuisance Calls] and press .
2
Set each item.
Menu item Operation
Register Caller Save the phone number of the last
received call.
Select [Register Caller] → [Yes].
Reg. selected
No. Select [Reg. selected No.] → Enter
the phone number (within 22 digits)
→ Select [Yes].
Delete all entries Select [Delete all entries] → [Yes].
Delete last entry D e l e t e t h e l a s t s a v e d p h o n e
number. You can delete another
p h o n e n u m b e r f r o m t h e l a s t
saved one by repeating the same
operation.
Select [Delete last entry] → [Yes].
Check No. of
entry Select [Check No. of entry].