NTT docomo FOMA SO906i, Руководство пользователя

Страница: 231 / 550

229
i-
α
ppli
3
Select [User set] and press .
Ｕｓｅｒ ｓｅｔｔｉｎｇ
Ｓｔｙｌｅ ＯＦＦ
Ｄａｔｅ ２００８／０４／１０ Ｔｈｕ
Ｔｉｍｅ ０９：０６
Ｄａｙ Ｍｏｎ
4
Select a style of the Auto-start time at
[Style].
[OFF]:
Do not set the start time.
[D/T]:
Start the software automatically at the specified
date and time.
[Evd]:
Start the software automatically at the specified
time everyday.
[Week]:
Start the software automatically at the specified
time on every specified day of the week.
5
Enter the date/time/day of the week.
 Enter the date/time/day of the week according to
the style of the auto-start time selected in step 4.
6
Press (Complete).
7
Select [SW set] and press .
The SW set display appears.
8
Select [Valid]/[Invalid] of the Auto-start
function of the software at [Set].
The Auto-start is set.
● The Auto-start does not operate in the following
cases.
- When the FOMA terminal is powered off
- During
a call/communication
- When the date/time is not set
- When another function is executed
- When the Alarm/Schedule alarm/Booking
alarm is set to start at the same time as the
Auto-start
- When the Lock all/Personal data lock of
i- α ppli is set
- When the Omakase Lock is set
- When 2in1 is set to the B mode (when i-
α ppli
with mail software is used or i- α ppli uses
mail)
Setting i- α ppli for the
Stand-by Display
<i- α ppli stand-by>
Only one supporting software can be set for
the i-
α ppli stand-by display. The software
that supports the i-
α
ppli stand-by display is
identified by “ / / ”.

When the software using network transmission is set
for the i- α ppli stand-by display, it may not operate
properly depending on the radio wave condition.
 When you set the i- α ppli stand-by display from
the i- α ppli software list display, the image set for
the stand-by display in the Stand-by display is also
changed.
1
From the list of i- α ppli software, select
the software and press (Func).
The Function menu appears.
2
Select [Stand-by display] → [Yes] and
press .
The i- α ppli stand-by display is set and the icon
(P.220) changes to indicate that the software is set
for the stand-by display.
To operate the software set for the i- α ppli stand-by
display
Press ( ) in the i- α ppli stand-by display.
● The message confirming whether to start the
i- α ppli stand-by display appears when the
FOMA terminal is powered on if the i- α ppli
stand-by display is set. Select [No] not to start
it. Select [Yes] or leave it for a while to start the
i-
α ppli stand-by display.
● If the Lock all or Personal data lock of i- α ppli
is set or 2in1 is set to the Dual or B mode while
you set the i-
α ppli stand-by display, the i- α ppli
stand-by display is temporarily terminated. When
you cancel the Lock all or Personal data lock, the
i-
α ppli stand-by display reappears.
● The Web To cannot be used from the i- α ppli
stand-by display.
● If an error which could terminate the i- α ppli
stand-by display occurs, the time of error
occurrence can be checked in the stand-by error
history.
● If a security error occurs in the i- α ppli stand-by
display, “ ” (Stand-by SW error) appears in the
stand-by display.
Continued