NTT docomo FOMA SO906i, Руководство пользователя

Страница: 239 / 550

237
Osaifu-K
eitai/T
or
uCa
Starting an Osaifu-Keitai-
compatible i-
α ppli
You have access to useful functions, for
example, reading/writing data on the IC card
using an Osaifu-Keitai-compatible i-
α
ppli in
order to deposit e-money (such as train ticket
deposit) or look up the balance or purchase
history from the mobile phone.

When you start an Osaifu-Keitai-compatible i-
α
ppli
software for the first time or download one, the
message “Current UIM necessary to use IC card?”
appears. If you select [Yes], you cannot use the IC
card function without inserting the associated UIM.
When you use the FOMA terminal with another UIM,
you once need to delete all Osaifu-Keitai-compatible
i-
α ppli software with the associated UIM inserted in
the FOMA terminal to use the IC card function.
1
From the Menu, select [Osaifu-Keitai] →
[IC card content] and press .
ＩＣ ｃａｒｄ ｃｏｎｔｅｎｔ １／２
ｉＤ 設定アプリ
2
Select the software and press .
The software is started up and “ ” or “ ” appears.
● Reading/writing of data on the IC card from the
software is interrupted in the following cases.
Partially read/written data may be discarded.
- When the time preset for the Schedule alarm/
Booking alarm/Alarm occurs
- When receiving a voice, videophone, or
PushTalk call (The operation that takes place
after you hang up the call may be different
depending on the service you use.)
- When the battery runs out
Using the Osaifu-Keitai
When you hold up and show the FeliCa mark
“
” side of the FOMA terminal to a reading
device, you can use the FOMA terminal for
payment as e-money or use it in place of a
train ticket. You can use this function without
starting up the associated software.

You can use Osaifu-Keitai by holding up and
showing the FeliCa mark to a reading device during
a call or i-mode connection. You cannot start the
software.

Holding up and showing the FeliCa mark to a
reading device may cause the associated software
to be executed.
When the FOMA terminal comes within the
communication range with the reading device, the
FeliCa Sign lights in green. The vibrator vibrates
when the communication starts.
● If the FeliCa mark on the FOMA terminal is not
recognized by a reading device, move the
terminal back and forth and side to side as you
hold it up to the device.
● Even if the FOMA terminal is powered off, you
can use the Osaifu-Keitai by holding up and
showing the FeliCa mark to a reading device. You
cannot use it if the battery pack is not attached.
You may not be able to use Osaifu-Keitai if the
attached battery pack has not been used for a
long period of time or has not been charged after
the battery alarm was sounded. In this case,
charge the battery pack and power on the FOMA
terminal. When the FOMA terminal is powered
off, you cannot start an Osaifu-Keitai-compatible
i-
α ppli to read/write data on the IC card.
● Note that if you leave the FeliCa Sign lighting, the
battery drains faster.