Assigning static routes to the management interface
97
Assigning an IP address to the management port
Assign an IP address to the management port to use it for out-of-band
(OOB) management. The standby IP must be in the same subnet as the
master IP. Create a virtual management port in addition to the physical
management ports on the switch management modules.
Procedure steps
Step
Action
1
In the main Device Manager window, select the management
port.
2
From the Device Manager toolbar, select Edit, Mgmt Port.
The Mgmt Port dialog box appears with the Mgmt Port-IP tab
displayed.
3
In the Addr box, type the required IP address for the
management port.
4
In the Mask box, type the subnet mask.
5
Click Apply.
6
Click Close.
7
From the Device Manager toolbar, select Edit, Chassis.
The Chassis dialog box appears with the System tab displayed.
8
In the VirtualIPAddr box, enter the IP address you want to
configure as the virtual address.
9
In the VirtualNetMask box, enter the subnet mask.
10
Click Apply.
--End--
Assigning static routes to the management interface
Assign a static route to specify a gateway address route for the
management interface. You can specify up to four static routes for the
management interface.
Procedure steps
Step
Action
1
From the Device Manager menu bar, choose IP, IP -
GlobalRouter (vrf 0)...
The IP dialog box appears with the Globals tab displayed.
2
Click Static Routes .
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319
01.01
Standard
30 May 2008
Copyright © 2008 Nortel Networks
.
Содержание Passport 8600 Series
Страница 135: ......
