Nortel Passport 8600 Series, Пусконаладка

Страница: 82 / 136

82 Initial steps using the NNCLI
For more information about the prompted questions, see
“Procedure job aid: setup utility prompts” (page 82) .
3 Reboot the switch.
--End--
Procedure job aid: setup utility prompts
The following table lists the questions prompted by the setup utility and
provides a description for each.
Table 13
Job aid: Setup utility prompt descriptions
Prompt Description and action
Please provide primary
config-file path
[/flash/config.cfg]:
Description: Indicates the name of the
primary configuration file.
Action: Press Enter to accept the default
(/flash/config.cfg), or type a different file name
for the primary configuration file. To store your
configuration file on the PCMCIA card, use
/PCMCIA/config.cfg. To specify the path to
the file is optional.
Please provide primary
image-file path
[/flash/p80a4100.img]:
Description: Indicates the name of the
primary image file.
Action: Press Enter to accept the default
(p80a4100.img), or type a different file name
for the primary image file. To specify the path
to the file is optional. If your run-time image
resides on your PCMCIA card, you must
specify the path as /PCMCIA/ filename.
Please add system prompt
[ERS-8606]:
Description: Specifies the text for the
prompt.
Action: Press Enter to accept the default
(ERS-8610), or type a different string of up to
20 characters.
Please select CPU primary slot
(5/6) [5]:
Description: Indicates the slot number of the
primary central processing unit (CPU). The
slot can be 5 or 6.
Action: Press Enter to accept the default (5),
or specify 6.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Copyright © 2008 Nortel Networks
.