Nordson Sure Coat, Руководство пользователя

Страница: 22 / 91

Description
A 2-8
Part 331235C
E 2003 Nordson Corporation
Part A: System Overview
Timers
The three system timers are the maintenance timer, the total spray timer,
and the service timer.
Timer Description
Maintenance The maintenance timer (gun on hours) keeps track of how long each gun has
been triggered. This is a cumulative total that can be reset. The maintenance
timer for a gun can be viewed by pressing the gun’s select key then pressing
the VIEW key while the gun is not triggered. The timer can be reset by
pressing the down arrow key while viewing the maintenance hours. Time is
shown as hours (HRS).
This timer can be used in tracking preventive maintenance procedures.
Total Spray The total spray timer (gun on total hours) keeps track of the total time each
gun has been triggered. This timer cannot be reset. The total spray timer can
be viewed by pressing the Nordson key and going into the diagnostics mode.
Time is shown as HRS x 10.
The numeral 1 appears in the upper left corner of the display when the total
spray timer is visible. This timer is used for diagnostic purposes.
Service The service timer (total hours) keeps track of how long the control system has
been in service. This timer cannot be reset. The service timer can be viewed
by pressing the Nordson key and going into the diagnostics mode. Time is
shown as HRS x 10.
The numeral 2 appears in the upper left corner of the display when the service
timer is visible. This timer is used for diagnostic purposes.
Pneumatic Modules
The pneumatic modules control the flow rate and atomizing air pressures to
the guns. Refer to Part B, Pneumatic Modules , for more information.
Main Control Cabinet
Front View
See Figure A 2-5 and refer to Table A 2-5.