Nordson Sure Coat, Руководство пользователя

Страница: 54 / 91

Troubleshooting
A 6-2
Part 331235C
E 2003 Nordson Corporation
Part A: System Overview
Diagnostics Mode
See Figure A 6-1. If the system is triggered while an error condition is
present, the question mark on the corresponding gun panel illuminates and
a question mark is displayed on the digital display. The diagnostics mode
must be entered to view the error codes.
1400473A
Figure A 6-1 Display of an Error Condition
Operation
The diagnostics mode is available at all times. The gun can still be
triggered while the display shows the diagnostics information.
Pressing the Nordson key at any time while in the diagnostics mode results
in an automatic exit from this mode and a return to the previous operating
mode.
NOTE:
Do not power off the system unless instructed. Error codes are
erased when the system is powered off.
WARNING: Do not touch the gun if the kV icon is flashing. A flashing kV
icon while the gun is not triggered indicates an electrostatics problem.
Failure to comply with this warning may result in an electrical shock.
Use the following procedure to enter the diagnostics mode.
1. Press the Nordson key.
2. See Figure A 6-2. Verify that the wrench symbol is shown on the digital
display to signify that the diagnostics mode has been entered.
The system performs internal checks and automatically runs through the
following diagnostics sequence. Each set of information is displayed for
several seconds before automatically proceeding to the next step.