Nordson Sure Coat, Руководство пользователя

Страница: 39 / 91

Configuration
A 4-5
Part 331235C
E 2003 Nordson Corporation
Part A: System Overview
Pneumatic Type
There are two available pneumatic types for the modular gun control
system. Use the following procedure to configure the modular gun control
system to recognize your system’s pneumatic modules.
1. Enter the configuration mode. Refer to Entering Configuration Mode for
instructions.
2. See Figure A 4-1. Press the B key (13). CHOOSE FLO scrolls across
the display (8), then either 0 or 1 appears.
3. Refer to Table A 4-3. Use the +/– keys (9) to select the appropriate
setting. The numeral on the display and the appearance of the F1/F2
icon (7) will indicate the current pneumatic type.
Table A 4-3 Pneumatic Type Settings
Numeral F1/F2 Icon Appearance Pneumatic Type
0 F1 illuminated Standard 2 gauge
1 F1 and F2 illuminated F1/F2 3 gauge
NOTE: To continue on to another configuration mode, press the
corresponding configurable option key. Configurable option keys are
indicated by blinking LEDs.
4. To exit the configuration mode, press the Nordson key (15).
Select Charge AFC Enable/Disable
The ability to adjust AFC set points in Select Charge mode 2 may be either
enabled or disabled.
NOTE: Performing this procedure will not affect the operation of AFC in the
Standard mode.
1. Enter the configuration mode. Refer to
Entering Configuration Mode for
instructions.
2. See Figure A 4-1. Press the AFC key (6). SELEC CHARGE AFC
scrolls across, then either 0 or 1 appears on the display (8).
3. Use the +/– keys (9) to select one of the following settings as desired.
S
0: Enabled. Operator may adjust Select Charge mode 2 AFC set
points to fit application.
S
1: Disabled. Factory-set Select Charge mode 2 AFC set points are
active and cannot be changed.
NOTE: To continue on to another configuration mode, press the
corresponding configurable option key. Configurable option keys are
indicated by blinking LEDs.
4. To exit the configuration mode, press the Nordson key (15).