NorAM 65E Turbo, Руководство по обслуживанию

Страница: 351 / 613

65E Turbo Motor Grader
Service Manual
Service 1.00_2006.03
Section 5
Rear Axle and Tandem
5-iii
SAFETY PRECAUTION INFORMATION
UNSAFE OPERATING PRACTICES AND IMPROPER USE OF THE MACHINE AND ITS
ATTACHMENTS ON THE PART OF THE OPERATOR OR SERVICE TECHNICIAN CAN RESULT
IN INJURIES. OBSERVE THE FOLLOWING SAFETY PRECAUTIONS AT ALL TIMES:
1. Read the Operator's Manual carefully before using the machine. Lack of operating
knowledge can lead to accidents.
2. OSHA requires that all operators be instructed on the proper operation of the machine
before they operate the unit.
3. Only allow properly trained and qualified persons to operate and service the motor
grader.
4. Wear proper safety equipment as required by the job, such as hard hats, safety glasses,
ear protection, heavy gloves, reflective vests, etc. Consult your employer, site
supervisor or OSHA for specific requirements.
5. To prevent falls, use assist rails and steps when getting on and off the machine. Keep
steps and platform clear of mud, oil, grease, snow, tools, and debris.
6. Do not use controls or hoses as handholds when climbing on or off machine. Controls
may move and inadvertently cause machine travel or implement movement.
7. Do not permit anyone but the operator to ride on the motor grader. There is no safe
place for extra riders.
8. Do not allow children to operate the machine or ride on the machine at anytime.
9. Never use moldboard or implements as a personnel lift.
10. Do not use the machine as scaffolding or a work platform.
11. Replace all missing, illegible or damaged safety decals.
12. Keep safety decals free of dirt and grime.
13. Do not modify or alter or permit anyone to modify or alter machine or any of its
components or machine functions without first consulting an authorized dealer.
14. Do not operate machine without ROPS or FOPS in place and in good condition.
!