11
EN
Output torque graph
Setting torque/Setting speed/Output torque (standard)
CAUTION
z
z
The graph is standard. The output torque range is not guaranteed.
After setting, always be sure to measure the output torque.
z
z
Use the tool within the specified range.
z
z
Regularly check the output torque and speed, and adjust the settings if changes have occurred.
z
z
“Speed setting value” is standard.
The actual speed changes by the temperature of the tool, mechanical loss, and grease conditions. It could vary
depending on differences in the tool itself.
z
z
When the speed is changed, the motor sound changes. This is not an error.
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
Torque (N∙m)
Torque (N∙m)
Torque (N∙m)
Torque (N∙m)
Speed setting (min
-1
)
DLV04C10 SOFT setting
DLV04C10 HARD setting
Speed setting (min
-1
)
DLV10C10 SOFT setting
DLV10C10 HARD setting
Setting torque (%)
Setting torque (%)
Setting torque 100%
Setting torque 100%
Setting torque 50%
Setting torque 50%
Setting torque 30%
Setting torque 30%
Setting torque 1%
Setting torque 1%
TV07783-1_DLV10C_en.indb 11
2017/06/27 17:41:33
