Nibe CLIMACOOL UCR 30, Инструкция по установке, эксплуатации и обслуживанию

Страница: 24 / 84

22
www.climacoolcorp.com
Figure 16
Part-Load Performance Advantage
1 2 1 2 1
water water water water
1 1 1
water water water water
2 2
water water water water
Water In (Hot)
Water Out (Cold)
Refrigerant
Circuit 1
Refrigerant
Circuit 2
Refrigerant Circuit 1 Only
Refrigerant Circuit 2 Only
Refrigerant Circuits 1 and 2
ClimaCool modular chillers employ reliable and highly
efficient brazed plate heat exchangers. These
compact exchangers are true dual-circuit heat
exchangers in which each water channel is flanked by
two refrigerant circuits. This design gives maximum
performance, even at part-load.
Of course, full
performance is
attained when the
dual-circuit heat
exchangers are run to
full-load (i.e. with
both refrigerant
circuits).
If circuit 1 is cut, the unique
design allows each water
channel to remain in
contact with refrigerant
circuit 2, providing optimum
heat transfer.
The same results are
achieved if circuit 1 is ran
and circuit 2 cut out;
optimum heat transfer,
even at part-load.
Optimum Performance Every Time –
Even at Part Load .