NF FRA5014, Инструкция по эксплуатации

Страница: 70 / 107

5.4 Command Descriptions
FRA5014 5-22
6th parameter <phase_ch4> CH4/CH1 phase judgment output setting 0: No output / 1: Output
Format is all <NR1>
Response <NR1>
−
1 (NG if below lower limit) / 0 (SUCCESS) / 1 (NG if above upper limit)
All other items are <NR2>
Query example SENS:DATA:SPOT:LIM:REP:SELected? 1, 1, 0, 0, 1, 1
Response example 1,0,
−
1,1
:SENSe:DATA:SWEep[:DATA][:ALL]?
Description Outputs all sweep measurement results.
Parameters None
Response <NR3>,<NR2>,<NR2>,<NR2>,<NR2>,<NR2>,<NR2>
Frequency, CH2/CH1 gain, CH2/CH1 phase, CH3/CH1 gain, CH3/CH1 phase,
CH4/CH1 gain, CH4/CH1 phase
Query example SENS:DATA:SWE?
Response example 100.00E+03,
−
4.72,
−
118.62,
−
10.11,90.02,
−
20.79,151.32,…
Commas are used to separate data output for multiple measurement points.
:SENSe:DATA:SWEep[:DATA]:SELlected? <freq>, <gain_ch2>, <phase_ch2>,
<gain_ch3>, <phase_ch3>, <gain_ch4>, <phase_ch4>
Description Outputs only the specified items (up to 7 items) among the sweep measurement
results.
1st parameter <freq> Frequency output setting 0: No output / 1: Output
2nd parameter <gain_ch2> CH2/CH1 gain output setting 0: No output / 1: Output
3rd parameter <phase_ch2> CH2/CH1 phase output setting 0: No output / 1: Output
4th parameter <gain_ch3> CH3/CH1 gain output setting 0: No output / 1: Output
5th parameter <phase_ch3> CH3/CH1 phase output setting 0: No output / 1: Output
6th parameter <gain_ch4> CH4/CH1 gain output setting 0: No output / 1: Output
7th parameter <phase_ch4> CH4/CH1 phase output setting 0: No output / 1: Output
Response Only frequency is <NR3>
All other items are <NR2>
Query example SENS:DATA:SWE:SEL? 1,0,0,1,1,0,0
Response example 100.00E+03,
−
4.72,
−
118.62,99.00E+03,
−
4.42,
−
110.46, …
Commas are used to separate data output for multiple measurement points.
:SENSe:DATA:SWEep:POINt?
Description Outputs the measurement points in the sweep measurement results.
Parameters None
Response <NR1>
Query example SENS:DATA:SWE:POIN?
Response example 1000