NF DP015S, Инструкция по эксплуатации

Страница: 169 / 304

4.8 Using Memory Function
DP Series
151
-------- Notes ----------------------------------------------------------------------------------------------------------------
 A file cannot be renamed in the USB memory if a file with the same name exists in the
NF_TOOL\NF_DP\ARB_DATA folder. An error message is displayed.
---------------------------------------------------------------------------------------------------------------------------------
4.8.3 Sequence Memory
The user-created sequence can be saved into the Sequence Memory.
Both the internal and USB memories can be selected as the Sequence Memory. Creation and saving
of a sequence are performed using the sequence menu (see
4.2 ) or the control software in the
attached CD-ROM. For the content saved in the Sequence Memory, see Table 4-9.
The internal memory has 5 Sequence Memories from No. 1 to No. 5.
Table 4-9 Content Saved in Sequence Memory
Setting Item Factory default setting
Output range selection 100V
Output mode selection AC-INT
Parameters of Sequence Function Refer to 4.28
 SEQ Store
In the Memory View, select [SEQ Store] to change to the Sequence Save View as below, allowing
you to save, clear, and rename the sequence. For the operation method, see
4.2.8
and
4.2.9
.