10. Specifications
PROGRAMMABLE AC POWER SOURCE
262
10.22 External Signal Input
The external signal input works differently depending on the selection of the signal source.
10.22.1 External Synchronous Signal Input (Signal Source SYNC only)
This is the signal to synchronize the frequency of the internal signal source with the one of the
external signal source.
When the signal source is SYNC, you can select whether to synchronize with this external signal
input or the power input frequency of the product. When synchronizing with the power input
frequency, no signal input is needed.
All
models
Factory
default
Synchronization signal
source switch
External synchronization signal (EXT) or
Power input (LINE)
LINE
Synchronization
frequency range
40 to 500 Hz
Input terminal
BNC connector (rear panel, unbalanced)
Input impedance
1 M
Ω
Threshold of input
voltage
TTL level
Minimum pulse width
500
μ
s
Nondestructive
maximum input voltage
±
10 V
10.22.2 Voltage Setting Signal Input (Signal Source VCA only)
This is the signal to set the output voltage amplitude of the internal signal source (DC input).
Output voltage (Vop) = Voltage setting signal (Vdc) x Gain (Vop/Vdc)
Example 1) For the AC mode, signal source = INT, the gain of 100.0, and the voltage setting
signal input of 1 Vdc, the output voltage is 100 Vop
Example 2) For the AC mode, signal source = INT, the gain of 141.4, and the voltage setting
signal input of 1 Vdc, the output voltage is 141.4 Vop(=100 Vrms)
Specification
Factory
default
100 V range: 0.0 to 220.0 times
100
Gain setting range
200 V range: 0.0 to 440.0 times
200
Setting resolution
0.1
Gain accuracy
±
5%
(DC, 45 Hz to 65 Hz, the gain is the factory default, the rated output
voltage, no load)
Input terminal
BNC connector (rear panel, unbalanced)
Also used as the external synchronization signal input
Input impedance
1 M
Ω
Input voltage range
±
2.2 V (A/D resolution 10 bit)
Nondestructive
maximum input voltage
±
10 V
Note: In the polyphase model, polyphase system, and polyphase output of the Multi-phase model,
the setting is common to all the phases.
Содержание DP015S
