Newport ESP300 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 314

Newport ESP300 Series Скачать руководство пользователя страница 2

Warranty

Newport Corporation warrants that this product will be free from
defects in material and workmanship and will comply with Newport’s
published specifications at the time of sale for a period of one year from
date of shipment. If found to be defective during the warranty period,
the product will either be repaired or replaced at Newport's option.

To exercise this warranty, write or call your local Newport office or
representative, or contact Newport headquarters in Irvine, California.
You will be given prompt assistance and return instructions. Send the
product, freight prepaid, to the indicated service facility. Repairs will
be made and the instrument returned freight prepaid. Repaired
products are warranted for the remainder of the original warranty
period or 90 days, whichever first occurs.

Limitation of Warranty

The above warranties do not apply to products which have been
repaired or modified without Newport’s written approval, or products
subjected to unusual physical, thermal or electrical stress, improper
installation, misuse, abuse, accident or negligence in use, storage,
transportation or handling. This warranty also does not apply to fuses,
batteries, or damage from battery leakage.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE. NEWPORT CORPORATION SHALL NOT
BE LIABLE FOR ANY INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
PURCHASE OR USE OF ITS PRODUCTS.

First printing 1999

Copyright

2002 by Newport Corporation, Irvine, CA. All rights

reserved. No part of this manual may be reproduced or copied without
the prior written approval of Newport Corporation.

This manual has been provided for information only and product
specifications are subject to change without notice. Any change will
be reflected in future printings.



2002 Newport Corporation

1791 Deere Ave.
Irvine, CA 92606
(949) 863-3144

P/N 28187-02 Rev. F

ii

Preface

«
1
2
3
4
...
»

Содержание ESP300 Series



























































































































































































































































































































Отзывы:

Нет отзывов