NewMar VENTANA 2022, Руководство пользователя

Страница: 42 / 238

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
37
APPLIANCES
Norcold Four Door Refrigerator with Built-In Ice Maker
Operation (Model: 1200 and 1210 Series)
Provides basic operation instructions for a Norcold Four Door Refrigerator with Built-In Ice Maker (Model: 1200 and
1210 Series).
•
120 volts AC: 108 volts min.-132 volts max.
•
12 volts DC - control voltage: 10.5 volts min. - 15.4
volts max.
The refrigerator operates on these energy sources.
Operation out of these limits can damage the refrigerator
electrical components and will void the warranty.
AC Operation
The ON / OFF button [30] starts and shuts down the
refrigerator:
1. To turn on the refrigerator, push and release the ON /
OFF button.
2. To turn o ff the refrigerator, push the ON / OFF button
for one second and then release.
ON/OFF BUTTON
The SET TEMP button [32] controls the temperature
adjustment of the freezer and the fresh food
compartment.
1. Push the SET TEMP button and the temperature
setting (the numbers “1-9”) show in the center display
[33]. The number “9” is the coldest temperature
setting.
2. Push and hold the SET TEMP button and the
temperature setting changes.
3. Release the SET TEMP button when the temperature
setting that you wish appears.
4. After ten seconds, the temperature setting will go out
and only a green power ON light remains.
NOTE: Push and release the MODE button to show “AC”,
the current mode of operation, in the center display for 10
seconds.
5. If 120 volts AC is not available to the refrigerator:
•
The fault codes “no” “AC” shows in the center
display and an audible alarm sounds.
6. If 120 volts AC is available to the refrigerator, but is
not operating correctly:
•
A fault code shows in the center display, and an
audible alarm starts.
SET TEMP BUTTON
The refrigerator control panel is between the freezer
compartment and the fresh food compartment.
To maintain the operating control functions of the
refrigerator, a 12 volt DC power supply is necessary.
The refrigerator receives DC power from the 12 volt
system of the vehicle; either an auxiliary battery, a
converter, or the vehicle engine battery.
Control Panel
Optional Ice Maker
The ice maker is fully automatic and will operate
in ambient temperatures as low as 0° F. To allow
operation at temperatures between 0° F and 32° F., the
ice maker has a heater on the solenoid water valve and
on the water line between the solenoid valve and the
ice maker.
When the freezer temperature of the refrigerator is low
enough, the ice maker opens the water solenoid valve
and fills the mold. The ice maker ejects the frozen ice
into a storage bin. As the storage bin fills, the ice raises
the shut-o ff arm until it turns o ff the ice maker. As you
use the ice and lower the ice level in the storage bin,
the shut-o ff arm also lowers. This turns the ice maker
ON and begins the process of making ice.
The ice maker operates on:
•
Cold potable water at a pressure of 15 psi - 125 psi
•
120 Volts AC: 108 VAC min. - 132 VAC max.
ICE MAKER OPERATION:
1. Make sure the ice maker AC power cord is plugged
into a receptacle.
2. Open the water shut o ff valve of the vehicle.
NOTE: Make sure that the ice maker arm can move freely
and does not touch the frozen foods in the freezer.
3. Push the ice maker arm down to the ON position.
CAUTION: If you operate the refrigerator without the
proper water supply, make sure the ice maker arm is up in
the OFF position.
4. Allow the freezer to cool enough and ice production
will begin to fill the storage bin.