© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
217
SLIDEOUTS
Due to the dual motor setup, manual retraction using
a separate battery or 12V source is not recommended
since motors run at di
ff
erent speeds. This may increase
the risk of binding the room and/or causing extensive
damage to the drive assembly.
Make sure you do not damage portions of the
shaft that will slide through the motor, trantorque,
bearing, and cog wheels.
IMPORTANT
!
On slideout motors equipped with the 5/8” reduction gear
nut, it can be turned to retract the slideout.
5. After the slideout is fully retracted, reinstall the brake.
Option 3 - Wardrobe Slideout
Motor with Square Shaft
This procedure can be performed on coaches with a
brake on the slideout motor.
IMPORTANT
!
IF THE SLIDEOUT IS STUCK IN THE
EXTENDED POSITION
1. Remove the four mounting bolts, and move over the
slideout motor until it disengages from the square
shaft.
2. Manually push the room in or out, or use a wrench to
rotate the shaft. Make sure you do not damage the
shaft with the wrench.
WITH MANUAL LOCK ARMS
3. Lock the room with manual lock arms (if equipped).
4. Take the coach to an authorized service center for
diagnosis and repair.
WITH MECHANICAL LOCK ARMS
3. Slide the motor back over onto the square shaft, and
reinstall the four mounting bolts.
4. The motor and brake assembly must be installed
(or another way devised) to hold the slideout in the
retracted position prior to traveling.
5. Take the coach to an authorized service center for
diagnosis and repair.
Depending on the year, model, and floorplan of the
coach, the exact slideout motor(s) location may vary.
Generally, they may be accessed from under the
slideout in the compartment area. Some motors may
also be located in the wheel well area under a cover.
NOTICE
!
Manually Retracting a Dual Motor Electric Full Wall
or Kitchen Slideout with Square Shaft
This article provides manual retraction procedure options for a dual motor electric full wall or kitchen slideout with a
square shaft.
Option 1
This procedure can be performed on coaches with a
brake on the slideout motor.
IMPORTANT
!
Содержание VENTANA 2022
Страница 1: ...SM 2022...