© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
188
PLUMBING
FRESH WATER LINES TO THE KITCHEN
The hot and cold plumbing lines
connecting slideout-installed
components, such as the kitchen
sink and other optional equipment
utilizing the coach water supply,
are typically hard-plumbed within
the slideout.
To ensure flexibility, a braided
hose connects the rigid plumbing
from within the slideout to the rest of the plumbing in
the coach. This hose easily moves with the slideout as it
extends and retracts. The plumbing lines are normally tied
to the flexible drain pipe and extend and retract smoothly
as the slideout travels.
Hot and Cold Low Point Drains
Low point drains are normally located in the water
compartment and are marked “Low Point Drains.” Some
valves are mounted in the water control panel and others
are placed close to the water compartment and marked
with a sticker nearby. Typically the coach has one hot
water low point drain and one cold water low point drain,
which are used to empty the water lines. Open the valves
to relieve water pressure and drain the water lines. Close
the valves for normal operation of the pressurized water
system.
LOW POINT DRAIN CONFIGURATION
EXAMPLES
On coaches equipped with tank rinse low point drain(s),
turning the tank rinse drain valve to the “open” position
will remove pressure and drain the tank rinse line. When
finished using the tank rinse, it is recommended to turn
o
ff
the water supply to the tank rinse connection. Open
the valve, and drain o
ff
the pressure in the line before
disconnecting the water hose.
Preventing, Stopping, and
Repairing Plumbing Leaks
In the event of a water leak, immediately shut o
ff
the
water pump and/or disconnect the coach from the
pressurized water source. Open the low point drains
in the water compartment. This will relieve pressure
and allow time to locate the leak and/or a shuto
ff
valve (if the coach is equipped).
IMPORTANT
!
Plumbing repairs should be performed by an
authorized service center, followed by a pressure test.
IMPORTANT
!
Poor or improper winterization may cause leaks, and/or
vibration and flexing during travel can cause pipes and
fittings to work loose. Follow this checklist to prevent or
repair any plumbing leaks:
•
Check all of the plumbing connections for leaks on a
yearly basis.
•
If the water pump runs when all faucets are turned o
ff
,
check for a leak.
•
Be sure the drain valves are closed.
•
Tighten any loose faucet connections with a wrench.
•
Disconnect the leaking connections completely, and
check for mineral deposits or foreign material on the
sealing surfaces. Clean the surfaces thoroughly, and
reinstall the fitting.
Содержание VENTANA 2022
Страница 1: ...SM 2022...