© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
106
ELECTRONICS
OmniVue 360 Surround View Camera System
Operation (Model: PV360NS)
This article provides basic operation instructions for an OmniVue 360 Degree Surround View Camera System (Model:
PV360NS).
Overview
The OmniVue 360 is virtually the same as the prior PV360
system. The di
ff
erence is in the added views available. The
installation is exactly the same with the same footprint. This
document will show what you should see for each view.
The system does require being calibrated. If the system
is not calibrated you will see a block in the middle of the
screen that says “WARNING”. Another sign that it has not
been calibrated is there will not be a Newmar logo at the
bottom right of the monitor. If not calibrated, it will show
”PERIMETERVIEW 360” instead.
To access the 360 camera views, touch the “CAM” button
on the left side of the monitor. Below are the camera views:
Voyager LCD 3-Camera Mirror Monitor Operation
(Model: VOM718)
This article provides basic operation instructions for a Voyager LCD 3-Camera Mirror Monitor (Model: VOM718).
Controls and Operation
Source(s): Voyager VOM718 7” Color TFT LCD 3 Camera Mirror Monitor
Owner’s Manual
Product(s): This source is associated with more than one product. Refer
to Newgle for more information about the product(s) o
ff
ered for your
coach’s model year.
POWER ON/OFF (1)
•
Press once to run on unit.
•
Press again to turn o
ff
unit.
LEFT/RIGHT ARROWS (2, 3)
•
Primary Function: Pressing arrow buttons increases/
decreases brightness, contrast, color, tint, volume.
•
Secondary Function: While in menu modes, the
arrows are used to select the option setting.
DAY/NIGHT (4)
•
Switch between day and night mode.
MENU (5)
•
Primary Function: Press MENU button to enter the
OSD.
•
Secondary Function: While in menu modes, the MENU
button is used to return to the previous menu.
SELECT (6)
•
Primary Function: Press SELECT button sequences
source input modes from CH1 to CH3.
•
Secondary Function: While in menu mode, the
SELECT button is used to select the highlighted
function or option setting.
Refer to the Voyager owner manual for additional
functions and setup instructions.
Содержание VENTANA 2022
Страница 1: ...SM 2022...