© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
180
INTERIOR
Shades and Window Coverings
MCD Shade Operation via Remote
This article provides basic operation instructions for a MCD Shade via a 15-Channel Remote.
To select which shade(s) to operate, use the side arrows
to scroll through the selections as they appear on the LCD
screen. Once the chosen shade is selected, use the up or
down arrows to perform the desired operation.
To stop the shade movement mid-travel, use the “minus”
button between the up and down arrows. This will
send a command to stop the selected shade operation,
regardless of the direction of travel.
The living room and bedroom remotes both operate in
the same manner. Depending on the coach floorplan, the
channel names may change, and some channels may be
extra and may not be named.
Living Room Channel Example:
0 = All Shades
4 = Passenger
Night Shades
8 = Driver Side
Front Slideout
Night Shades
12 = Chair Night
Shades
1 = All Day
Shades
5 = Passenger
Sofa Day Shades
9 = Dining Day
Shades
13 = Kitchen Night
Shades
2 = All Night
Shades
6 = Passenger
Sofa Night Shades
10 = Dining Night
Shades
14 = Kitchen Night
Shades
3 = Driver Night
Shade
7 = Driver Side
Front Slideout Day
Shades
11 = Chair Day
Shades
15 = Not Archived
Visor/Shade (Day Shade)
The Visor switch is located on the dash and
adjusts the windshield screen up or down.
When the ignition switch is turned on it limits
the visor travel to approximately 1/2 way
down and with the key o
ff
it travels all the
way down to the dash. The screen will travel
up until it reaches the stop setting.
Do not manually pull down on the power shades, as
damage may result.
IMPORTANT
!
This information is generic in nature and may not be
specific to your exact coach model and/or year.
NOTICE
!
This article provides basic operation instructions for a Power Windshield Shade.
Power Windshield Shade Operation
Remote Battery Replacement
To replace the battery in an MCD 15-channel remote:
1. Slide the wall mount straight up and o
ff
of the remote.
If mounted, slide the remote down and o
ff
of the
mount.
2. Slide the back panel of the remote down about 1/8”
(as far down as it can go).
3. Pull out on the back panel to remove it from the
remote.
4. Before you remove the dead batteries, take a look
at how they are placed so you know how to put the
new batteries in correctly. Most battery compartments
in remotes use a plus sign (+) to indicate where the
positive end of the battery should go.
5. Replace the batteries. It is best to replace both
batteries. If one defective battery is replaced, while
leaving another weak or defective battery, lowered
performance, or ultimately damaging the new or good
batteries, may result.
6. Reinstall the cover by placing it on the back of the
remote and sliding it upward into place.
7. To remount the remote, slide it back up into the wall
mount.
Содержание VENTANA 2022
Страница 1: ...SM 2022...
