© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
203
PLUMBING
Operation
To shower while dry camping, follow these steps:
1. Place the Aqua Miser lever in the “recycle” position.
The diverter is labeled according to which direction
the valve should be turned to divert the water back to
the fresh tank instead of wasting the water and filling
the grey tank. The blue magic mushroom located
near the shower faucet will remain blue in color while
the water is cold.
2. When the magic mushroom turns milky white in color,
the water temperature is warm, and the system is
ready for final shower temperature adjustments to be
made. Turn the diverter valve back to the water flow
position.
3. Turn the shower mixing valve (large lever on faucet)
until the desired temperature has been reached.
4. Use the output selectors (buttons at the top of the
faucet) to select the preferred water output, such as
the shower head or the hose wand.
If you use the diverter valve to stop water flow during
the shower once the magic mushroom turns from blue to
white, you are diverting hot water to the fresh tank. If the
coach is connected to a pressurized water source while
the diverter valve is in the recycle position, this may cause
the fresh water tank to overflow.
If left in the diverted/recycle position while the coach
is connected to city water, the Aqua Miser system will
continue to add water to the tank if the fresh water
fill valve in the water compartment is turned to the
auto fill position. Adding water to the fresh tank in
this manner is unregulated and may cause the fresh
tank to overflow, which may make the auto fill system
appear as though it is malfunctioning.
IMPORTANT
!
Winterizing the Aqua View Fresh Water Reclamation
System
This article provides additional winterization instructions relevant to coaches equipped with an Aqua View Shower Miser
Fresh Water Reclamation System. This information should be used in conjunction with the coach winterization process as
written in Newgle.
Do not leave the valve in bypass mode when running
antifreeze in the line because it will allow antifreeze
into the fresh tank.
IMPORTANT
!
•
Cycle the valve to the recirculate position to purge
the water out of the line back to the fresh water tank
while pressurized air supply is connected.
•
Place the valve back to normal flow mode to the
shower head.
•
Then purge the shower.
•
Run RV antifreeze through the shower system.
Содержание VENTANA 2022
Страница 1: ...SM 2022...