SmartNA-X 1G/10G Modular | Command Line Reference |
95
SmartNA-X
™
1G/10G User Guide 1.4
©
2015 Network Critical Solutions Limited
Example
Set location information to “Secure rack A”:
CONTROLLER>
set location Secure rack A
CONTROLLER>
show location
Secure rack A
show contact
Use the
show contact
command to report contact details (blank by default).
Syntax
show contact
Parameters
This command has no arguments or keywords.
Example
Report contact details:
CONTROLLER>
show contact
[email protected] 555-0123 xt. 4
set contact
Use the
set contact
command to enter contact information for the device installation.
Syntax
set contact
contact -details
Parameters
contact details
Specify contact details using 1-19 alphanumeric characters. Commas and other punctuation characters
may be used but may be replaced on RADIUS servers by underscores "_".
Example
Set contact information to "Network admin Tel: 4321":
CONTROLLER>
set contact Network admin Tel: 4321
CONTROLLER>
show contact
Network admin Tel: 4321
set banner
Use the
set banner
command to specify a banner message. The message can be up to 25 lines long and may be used to
provide useful information about this device to anyone querying the banner message.
Syntax
set banner
line-number
text
Parameters
line-number
Specify a line number for the message. Valid range 1–25.
text
Specify the text for the banner. It is not necessary to enclose the message in quotes ("..."). The text will be added to
the specified line number.