manualshive.com logo in svg

Network Critical SmartNA-X, Руководство пользователя, Страница: 143 / 200

Поделиться
Скачать
Network Critical SmartNA-X Скачать руководство пользователя страница 143

SmartNA-X 1G/10G Modular | Command Line Reference | 

143

SmartNA-X

™

 1G/10G User Guide 1.4 

©

 2015 Network Critical Solutions Limited

SNMP commands

This section provides information for SNMP commands:

Note: 

 The 

apply

 command must be entered before configuration commands take effect

snmp show agent

Use the 

snmp show agent

 command to show the enabled/disabled status of the SNMP agent. By default the SNMP agent

is disabled and must be enabled with the 

snmp enable

 command in order to expose system management data to an SNMP

manager and for SNMP notifications (traps) to be sent.

Syntax

snmp show agent

Parameters

This command has no arguments or keywords.

Example

Show the enabled/disabled status of the SNMP agent:

CONTROLLER>

snmp show agent

SNMP : Enabled

snmp enable agent

Use the 

snmp enable agent

 command to enable the SNMP agent. Enabling the agent allows SNMP managers to access

system management data and for SNMP notifications (traps) to be sent.

Syntax

snmp enable agent

Parameters

This command has no arguments or keywords.

Example

Enable the SNMP agent:

CONTROLLER>

snmp enable agent

CONTROLLER>

snmp show agent

SNMP : Enabled

CONTROLLER>

apply

snmp disable agent

Use the 

snmp disable agent

 command to disable the SNMP agent. Disabling the agent prevents SNMP managers from

accessing system management data and prevents SNMP notifications (traps) from being sent.

Syntax

snmp disable agent

Parameters

This command has no arguments or keywords.

Содержание SmartNA-X









































































































































































































Отзывы:

Нет отзывов