Advanced Configuration
94
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
To configure a point-to-multipoint wireless network with or without client association:
1.
Configure the security profiles on the wireless access point (AP1 on LAN Segment 1 in
the previous figure):
a.
Select
Configuration > Wireless Bridge
.
The Bridging screen displays (see the following figure).
b.
(Optional) Click the
802.11a/na
tab.
The Bridging screen lets you configure a point-to-point wireless network for the
802.11a/na modes.
c.
Select the
Enable Wireless Bridging
check box.
The Local MAC Address field is a nonconfigurable field that shows the MAC address
of the wireless access point.
d.
Select the
Wireless Point to Multi-Point Bridge
radio button.
The screen adjusts. The profile table shows four security profiles.
e.
Select a security profile to edit by selecting the corresponding radio button to the left
of the profile.
f.
Click
Edit
to configure the selected security profile settings.
The Edit Security Profile screen displays for the selected security profile. (The
following figure contains some examples.)
