Management
71
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Note:
After you have restored the factory default settings on the wireless
access point:
*
All custom configurations are lost.
*
The login password is
password.
*
The default LAN IP address is
192.168.0.100
.
*
The DHCP client is disabled.
*
The Access Point Name field is reset to the name printed on
the label on the bottom of the unit.
Use the Web Management Interface to Restore Factory Default Settings
IMPORTANT:
During the restoration process, do not try to go online, turn off the
wireless access point, shut down the computer, or do anything else
to the wireless access point until it finishes restarting!
To restore the factory default settings using the web management interface:
1.
Select
Maintenance > Reset > Restore Defaults
.
The Restore Defaults screen displays:
2.
Select the
Yes
radio button.
By default, the No radio button is selected.
3.
Click
Proceed
.
The wireless access point resets to the factory default settings.
During the restoration process, the wireless access point automatically restarts. The
restoration process typically takes about one minute. When the Test LED turns off, wait a
few more seconds before doing anything with the wireless access point.
