Management
65
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
3.
Click
Apply
.
Secure Shell and Telnet Management
By default, Secure Shell (SSH) is enabled and Telnet is disabled.
To configure remote console features:
1.
Select
Maintenance > Remote Management > Remote Console
.
The Remote Console screen displays:
2.
Enable or disable the remote console features:
•
Secure Shell (SSH)
. To enable this feature, select the
Enable
radio button, which is
the default setting. Select the
Disable
button to disable the feature.
•
Telnet
. To enable this feature, select the
Enable
radio button. Select the
Disable
button to disable the feature, which is the default setting.
3.
Click
Apply
.
To manage the wireless access point over an SSH or Telnet connection:
1.
Start an SSH or Telnet session to the wireless access point using an application such as
PuTTY, if such an encryption application is allowed by law in your country.
2.
Enter the login name and password (
admin
and
password
are the defaults).
Read-Write Community Name Enter the community string to allow the SNMP manager to read and write
the wireless access point’s MIB objects. The default is private.
Trap Community Name
Enter the community string to allow the SNMP manager to send traps. The
default is trap.
IP Address to Receive Traps
Enter the IP address of the SNMP manager to receive traps sent from the
wireless access point.
Trap Port
Enter the number of the SNMP manager port to receive traps sent from the
wireless access point. The default is 162.
Setting
Description
