Management
74
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
To enable a syslog server:
1.
Select
Configuration > System > Advanced > Syslog
.
The Syslog screen displays:
2.
Specify the settings as explained in the following table:
Setting
Description
Enable Syslog
Select the check box to enable the syslog option. By default, the syslog option
is disabled.
Syslog Server IP Address
Enter the IP address of the syslog server to which the wireless access point
sends the syslog files.
Port Number
Enter the port number that is configured on the syslog server. The default port
number is 514.
3.
Click
Apply
.
Enable Rogue AP Detection and Monitor Access Points
This section describes how to use the Rogue AP detection feature to provide more security in
your wireless network.
•
Enable and Configure Rogue AP Detection
•
View and Save Access Point Lists
Enable and Configure Rogue AP Detection
The wireless access point can detect rogue access points and prevent them from connecting
to the wireless access point. The wireless access point maintains a list of access points it
detects in the area. Initially all detected access points are displayed in the Unknown AP List.
You restrict communication to approved access points by adding them to the Known AP List
and enabling the rogue AP detection feature.
