Supplemental Information
127
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Factory Default Settings
You can use the Reset button located on the rear of the wireless access point to reset all
settings to their factory defaults. This is called a hard reset.
To perform a hard reset, use a sharp object to press and hold the
Reset
button for
approximately 10 seconds (until the Test LED blinks rapidly). This returns the wireless access
point to the factory configuration settings that are shown in the following table.
Note:
Pressing the Reset button for less than 10 seconds simply causes
the wireless access point to reboot.
Electrical and Physical Specifications
Power adapter
12 VDC, 1A; plug is localized to country of sale
Physical specifications
•
Dimensions (h x w x d): 253.75 x 253.75 x 54.76 mm (10.0 x 10.0 x 2.16 in.)
•
Weight: 1.5 kg (3.31 lb)
Environmental
specifications
Operating temperature: 0 to 55°C (32 to 131°F)
Operating humidity: 10–9%, noncondensing
Electromagnetic
compliance
CCC and SRRC
Table 6. Default configuration settings
Feature
Description
Login for management and configuration
LAN management address
192.168.0.100
Subnet mask for management address
255.255.255.0
Required static address for management computer
192.168.0.210 and 255.255.255.0
User name (case-sensitive) for login
admin
Login password (case-sensitive) for login
password
Table 5. Technical specifications (continued)
Feature
Description
